111 Products found for your search
No results were found for the filter!
Paver-Clamp Multi6 M (Paver Laying machine) Multi6 M is standardly attached on each type of Optimas paver laying machine. Precise description of the innovative advantages ...
Paver-Clamp Multi6 M for various carrier (e.g.... Flexible for mounting on all common construction machines. A cost-effective start in mechanical paving.
Vacu-Pallet-Mobil The Mulitalent carries 1600 kg and up to 1.32 mtr. wide pallets and installs the conveyed goods at the same time.
Vacu-Mobil-Allrounder Due to the very compact design (width 920mm), no passage is too narrow and due to the rubber tracks, no underground are too difficult.
Vacu-Mobil E The low-noise vacuum generation with electric motor is ideal for projects where noise and exhaust emissions are not allowed or not wanted.
Vacu-Magnet 500 / 1500 P/H Enables effortless lifting and setting of kerbs, slabs, steps etc. up to 500 or 1500 kg.
Vacuum device „BE“ on Paver Laying Machine Vacuum attachment for placing concrete and granite kerbs as well as concrete and granite slabs or gutter stones.
PlanMatic "PRO" Available in two basic widths – the work range can be extended by up to 1.2 m using the hydraulic side flaps and the optionally-available extensions. The most effienct working width can be chosen based on the available carrier and the...
Maxi - Screed The stable and well-designed construction permits easy laying of the various substrates (sand, ballast, shingle) and precise levelling of the fine screed (sand, chips or similar substrates) up to a width of 7 metres. With its simple...
Egaliner Epic The Egaliner is an efficient tool for road builders, landscapers, gardeners for the installation of bedding material in paving construction, creation of fine subgrade, in landscaping for the preparation of lawns or seed beds or also the...
Side-shoot bucket "Finliner" 0,5 m³/1,0 m³ +... With the "Finliner" it is very easy to distribute material via a conveyor perfectly dosed. The bucket is emptied laterally via a conveyor belt, the amount of material is precisely metered by the speed of the conveyor belt and the loader....
Formwork system For creation of foundations for kerb and gutter stones with enormous savings in material and time.
Vacu-Lift H / P / D The lowest-priced variant of Vacuum tube lifter becomes a multitalent in combination with a wheel loader with a pallet fork
Vakuumgerät "BE" Das Vakuumgerät ist sehr schnell und einfach an den Ausleger der Optimas montiert und ist dann einsatzbereit. Die Funktionen „ansaugen und lösen“ werden direkt vom Fahrer ausgelöst. Der Fahrer kann die Bordsteine alleine direkt vom Paket...
Stone-Clamp MULTIFLEX A multiflexible attachment for placing kerbs, palisades, lawn grids, boulders, etc.
Spreading shovel Zum sehr gleichmäßigem Verteilen von verschiedenen Materialien wie z. B. Sand, Splitt, Muttererde, Schotter auf der Fläche.
Paver Joint Filling device for Optimas machines For filling joint material in paver joints on medium and large-sized paved areas.
Paver Joint Filling device for wheel loader For filling joint material in paver joints on medium and large-sized paved areas.
Paver Joint Filling device "Mini" 3.0 For filling joint material in paver joints on small and medium-sized paved areas.
Clean Sweeper The clean sweeper is fitted to the fore axle quickly and easily. Simple mechanical inclination 20 ° to the right and left. The universally-deployable and hard-wearing PP roller brushes picks up both coarse soiling and fine particles...
Paver Joint Cleaner "JointBooster" Patented system. Paver joints renovation with compressed air (without water)
Optimas Vacuum Device SV 200 E Handy vacuum device for lifting concrete and natural stone elements (also porous) up to 200 kg (440 lbs).
Optimas Vacuum Device SV 250 A Handy vacuum device for lifting airtight concrete and natural stone elements up to 250 kg (550 lbs).
Optimas Vacuum Device SV 500 A Handy vacuum device for lifting airtight concrete and natural stone elements up to 500 kg (1.110 lbs).
PlanMatic "Basic" Available in two basic widths – the work range can be extended by up to 1.2 m using the hydraulic side flaps and the optionally-available extensions. The most effienct working width can be chosen based on the available carrier and the...
Paver Cutter 330 – 1 spindle height adjustment Tiltable table for diagonal cut, Cutting height: 1 - 12 cm, Cutting width: 33 cm, Weight: 37,9 kg
Orit Paver Cutter 330 – 2 spindle height... Cutting height: 1 - 12 cm, Cutting width: 33 cm, Weight: 40,6 kg
Orit Paver Cutter 150 ultra-light Cutting height: 4 - 8.5 cm, Cutting width: 15 cm, Weight: only 12 kg
Orit Paver-and slab cutter 430 – 2 spindle... Cutting height: 1 - 12 cm (0.40 - 4.7 in), Cutting width: 43 cm (16.9 in), Weight: 49 kg (95 in)
Orit Clay & Concrete paver cutter 430 with... Cutting height: 1 - 12 cm (0.4 - 4.72 in), Cutting width: 43 cm (17 in), Weight: 62 kg (147 lbs)
Paver-Lifter No bending anymore - keystones are removed standing upright and placed directly into the appropriate gap.
Angle Scribe Practical tool for fitting-in paving stones, tiles or other slabs with millimetre precision.
Screed rails 20m for Mini Screed System Set consisting of screed rails: 6 x 3 m (9.8 ft.) and 2 x 1 m (3.28 ft.)
Screed rails 40m for Mini Screed System Set consisting of screed rails: 10 x 3 m (9.8 ft.), 4 x 2 m (6.6 ft.) and 2 x 1 m (3.28 ft.).
Screed rails 60m for Mini Screed System Set of screed rails: 12 x 4 m (13 ft.), 4 x 2 m (6.5 ft.) and 4 x 1 m (3,28 ft.).
Egaliner Epic - 120 The Egaliner is an efficient tool for road builders, landscapers, gardeners for the installation of bedding material in paving construction. Outer working width: 700 - 120 mm
Egaliner Epic - 210 The Egaliner is an efficient tool for road builders, landscapers, gardeners for the installation of bedding material in paving construction. Outer working width: 1200 - 2100 mm
Levelling Screed, infinitely adjustable 500 -... Stepless adjustable levelling screed, ideal for very small areas.
Levelling “Shoe“, short Ideal accessory for aluminium batten ( Height: 100 mm - Width: 18mm) for levelling.
Levelling "shoe", long (250 mm adjustable) Ideal accessory for aluminium batten ( Height: 100 mm - Width: 18mm) for levelling. Adjustable range on each shoe: 250 mm
